Varukorg
0
Produkt:
Produkter:
(Tom)
Inga produkter
Fastställs senare
Leverans
0,00 zł
Skatt
0,00 zł
Totalt:
Produkten tilllagd i din varukorg
Kvantitet
Totalt:
Det är 0 artiklar i din varukorg. Det är 1 artikel in din varukorg.
Totalt antal produkter:
Totalt frakt:
Fastställs senare
Skatt:
0,00 zł
Totalt:
xDeep DIR Harness from one piece of belt. Steel or aluminium backplate. Stiff webbing. Strong 6mm D-Rings with welded ends. DIR diving harness is supplied assembled and ready to use.
Genom att köpa denna produkt kan du samla upp till 5 lojalitetspoäng. Din varukorg kommer att uppgå 5 points som kan omvandlas till en kupong av 5,00 zł.
Steel or aluminium backplate
The XDEEP harness can be ordered both with aluminium and with stainless steel backplate.
You can decide if you prefer the heavier backplate made of stainless steel or the lightweight backplate made of anodized aluminium, if you travel frequently.
You can decide if you prefer the heavier backplate made of stainless steel or the lightweight backplate made of anodized aluminium, if you travel frequently.
Stiff webbing
We used stiff webbing to make it easier to put the harness on.
The webbing are made of polyamide – a fabric stronger than regular nylon and totally resistant to water, including sea water.
Polyamide fabrics are abrasion-resistant materials and consequently the durability of the diving harness is much higher than those made of less durable materials.
Strong 6mm D-Rings with welded ends
All XDEEP BC Systems are equipped with really top-quality D-Rings: made of 6 mm thick stainless steel wire with the ends welded and the smoothly polished.
You may be sure, that such strong D-Rings will not deform under any circumstances, even while jumping with the stage cylinders attached.
You may be sure, that such strong D-Rings will not deform under any circumstances, even while jumping with the stage cylinders attached.
Crotch strap
The harness is equipped with a crotch strap made of soft tape, which protects against in exploring the suit.
Stabilizer inflator
The left lane shoulder was placed stabilizer inflator, made of rubber with a cross-section of 7mm.
The stabilizer is fixed by means of a timer, which enables the adjustment while preventing spontaneous moving.
The harness is equipped with a crotch strap made of soft tape, which protects against in exploring the suit.
Stabilizer inflator
The left lane shoulder was placed stabilizer inflator, made of rubber with a cross-section of 7mm.
The stabilizer is fixed by means of a timer, which enables the adjustment while preventing spontaneous moving.
Det finns inga kundrecensioner just nu.
