Primary light source, excellent for underwater communication and exploration
Light output 800 lm, light distribution angle 6⁰
Low weight and compact design
Light intensity adjustment 20%, 60% and 100%
Este producto ya no está disponible
Al comprar este producto puede obtener hasta 29 puntos de fidelidad. Su carrito totalizará 29 points que se puede(n) transformar en un cupón de descuento de 29,00 zł.
A perfect primary light - a follow-up to its predecessor featuring improved specifications - 800 lm.
New electronics and new, more intuitive logic of the switch; colour temperature of 6300º K; light distribution angle of 6º providing a glow for extra lighting of the exploration area.
Improved ergonomics with a bigger switch knob; perfect for communication.
The new LED SPOT torch casing has been redesigned.
Now the head weighs less - a certain material used in it has been removed as it did not contribute to the casing's robustness, while increasing its weight.
These areas have been filled with PVC foam, which prevents internal light reflections and improves the product's aesthetics.
The switch knob size has been increased, which contributes to the head's ergonomics - now switching it on and off is easier.
The LED efficiency has been improved by almost 20% thanks to a completely new system supplying higher voltage current to the LED panel.
But it is still about the excellent LED's from Cree.
The new software managing the switch microcontroller is more intuitive than before.
The system signalling low battery life (the strobe flash) gives the user clear information on the rechargeable battery's status, switching the head to the 20% mode, which provides the necessary reserve of light in a possible emergency situation.
XPE LED's from Cree, providing 6300º K light colour have been used as the light source.
Combining the LED's with Ledil optics enables a perfect balance of lighting between the so-called spot and the glow while retaining the 6º light distribution angle, which makes the torch perfectly fit for both exploration and communication.
LED SPOT - Specification
LED SPOT applications: diving - as a primary light source.
The light is emitted by 4 Cree XPE LEDs with total power output 14 W.
Colour temperature of 8000 K and light distribution angle of 6º.
The lamp head has three position switch with light intensity regulation, appropriately 20%, 60%, 100% of power output. The switch is additionally equipped with battery discharge protection system.
LED SPOT's casing is made of anodised aluminium.
A front 6 mm thick tempered glass is sealed with 3 o-rings.
The head has a socket for plugging the power supply cable. The power supply cable plug is provided with 2 o-rings ensuring airtight connection after connecting to the head.
The batteries recommended for the head are ACCU 5 Ah or ACCU 2.5 Ah.
light source 4 x Cree XPE LED
maximum output light 800 lm
light distribution angle 6º
total power 14 W
colour temperature 6500 K
LED life span 50000 hours
power supply voltage 12 V
switch type magnetic sensor
with light intensity control
material anodised aluminium / DELRIN
max. length 89 mm
max. diameter 70 mm
front glass 6 mm tempered
weight 350 g
weight in water 130 g
pressure test 36 bar
max. service depth 200 m
No hay reseñas de clientes en este momento.