xDeep DIR Harness without plate. Stiff webbing. Strong 6mm D-Rings with welded ends.
xDeep DIR Harness from one piece of belt. Steel or aluminium backplate. Stiff webbing. Strong 6mm D-Rings with welded ends. DIR diving harness is supplied assembled and ready to use.
OMS Stainless Steel backplate truly shines thanks to superior de-burring process which eliminates backplate sharp edges, and prevents abrasion and cuts to webbing and BC's.
Carbon fiber adapter (stainless steel screw included)Weight: 0.113 kgThickness: 3mm
xDeep Next Generation Harness (GHOST, ZEN, PROJECT). Harness Next Generation is available in two sizes smaller for people with a height of 175cm and bigger for higher person.
DIR harness with a plate and set d-rings
TecLine DIR adjustable harness with back plate
xDeep DIR Harness from one piece of belt with Weight Pockets. Steel or aluminium backplate. Stiff webbing. Strong 6mm D-Rings with welded ends. DIR diving harness is supplied assembled and ready to use.
This basic harness uses 11 feet of 2 inch nylon webbing material, 6 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle.
TecLine Harness Comfort adjustable with backplate
xDeep - STEALTH 2.0 Harness
Tecline standard plate made of carbon fiberWeight: 0.475 kgThickness: 3mm
This harness utilizes the same padded shoulder strap configuration found on the IQ Pac. It can be installed on any standard backplate as an accessory. The harness can also be purchased installed on the OMS Stainless Steel or OMS Aluminum Backplate. An accessory comfort pad is available and can be installed without the need to remove the Harness.