Kurv
0
Vare:
Varer:
(tom)
Ingen varer
Fastlægges senere
Levering
0,00 zł
Moms
0,00 zł
I alt
Varen er lagt i kurven
Antal
I alt
Der er 0 varer i din kurv Der er 1 vare i din kurv
Varer i alt
Levering i alt
Fastlægges senere
Moms:
0,00 zł
I alt
xDeep DIR Harness from one piece of belt with Weight Pockets. Steel or aluminium backplate. Stiff webbing. Strong 6mm D-Rings with welded ends. DIR diving harness is supplied assembled and ready to use.
Ved at købe denne vare kan du samle op til 7 loyalitetspoint. Din kurv total 7 points som kan konverteres til en rabatkupon lydende på 7,00 zł.
Double-part weight pockets
This scuba diving harness is delivered with very durable double-part weight pockets.
The double-part pockets have several advantages: the risk of unpredictable loss of weight is much lower than with standard pockets, and the weight is easier and safer to handle. While getting onto the boat you can take it out safely and pass it to the crew.
The double-part pockets have several advantages: the risk of unpredictable loss of weight is much lower than with standard pockets, and the weight is easier and safer to handle. While getting onto the boat you can take it out safely and pass it to the crew.
Steel or aluminium backplate
The XDEEP harness can be ordered both with aluminium and with stainless steel backplate.
You can decide if you prefer the heavier backplate made of stainless steel or the lightweight backplate made of anodized aluminium, if you travel frequently.
You can decide if you prefer the heavier backplate made of stainless steel or the lightweight backplate made of anodized aluminium, if you travel frequently.
Stiff webbing
We used stiff webbing to make it easier to put the harness on.
The webbing are made of polyamide – a fabric stronger than regular nylon and totally resistant to water, including sea water.
Polyamide fabrics are abrasion-resistant materials and consequently the durability of the diving harness is much higher than those made of less durable materials.
Strong 6mm D-Rings with welded ends
All XDEEP BC Systems are equipped with really top-quality D-Rings: made of 6 mm thick stainless steel wire with the ends welded and the smoothly polished.
You may be sure, that such strong D-Rings will not deform under any circumstances, even while jumping with the stage cylinders attached.
You may be sure, that such strong D-Rings will not deform under any circumstances, even while jumping with the stage cylinders attached.
Crotch strap
The harness is equipped with a crotch strap made of soft tape, which protects against in exploring the suit.
Stabilizer inflator
The left lane shoulder was placed stabilizer inflator, made of rubber with a cross-section of 7mm.
The stabilizer is fixed by means of a timer, which enables the adjustment while preventing spontaneous moving.
The harness is equipped with a crotch strap made of soft tape, which protects against in exploring the suit.
Stabilizer inflator
The left lane shoulder was placed stabilizer inflator, made of rubber with a cross-section of 7mm.
The stabilizer is fixed by means of a timer, which enables the adjustment while preventing spontaneous moving.
Der er ingen kundeanmeldelser endnu.
